NAME CARDS
We have put together some examples of how you might want to finish your name cards with our silk ribbon & a handy guide on how to work out how many reels of ribbon you will need to purchase.

NAME CARDS
To achieve this finish we use 23cm of ribbon per card

WRAPPED AROUND MENU
To achieve this finish we use 34cm of ribbon per card

ATTACHED TO MENU
To achieve this finish we use 23cm of ribbon per card
HOW TO
Most of our silk ribbons come in 5 meter lengths (500cm)
So you can work out the amount of reels of ribbon you'll need depending on how many name cards you are doing by doing the following sum.
500cm divided by the amount of cm's suggested above
( Depening on how you are finishing your name cards) = How many name cards you'll get from each reel of silk ribbon.
Example we are tying 50 name cards like on the first example.
500cm divided bt 23cm = 21.7 ( so 21 name cards per reel of silk ribbon with some spare)
50 divded by 21 =2.3S So you will need 3 reels of silk ribbon to tie all your name cards